Home
Tap & Drill Rack
Colletizer     R8
Colletizer     5C
Colletizer  DA200
Colletizer  DA180
Colletizer    ER16
Colletizer    ER20
Colletizer    ER32
Colletizer   TG75
Colletizer  TG100
Colletizer     6K
Carbide Inserts
U-Joint Disc
Collet_Dimensions
Payment/Shipping
Machine Shop
About
Contact Us
VMCCA Car Tour
e-mail me

Universal Joint Flex Disc Universal Joint Flex Disc

Universal U-Joint Fabric Flex Coupler Disc This flexible fabric disc universal joint was in antique autos from the late 1920’s. One of the benefits of its design is to dampen vibrations that would otherwise be felt because the engine in these cars were bolted solidly to the frame. It also dampens clutch chatter.    These disks are made to the original specifications. It's a fabric/rubber U-joint coupler with many layers of fabric bonded together, same number of plies as the originals. Has show quality crisp edges and accurately spaced holes for balance. The measurements are 6 inch OD, 2-1/4 inch ID, just over 3/8 inch thick (.4”), 4.625 bolt hole circle.

This fabric universal joint disc is correct for the following vehicles:   
John Deere 1940 tractor L LA LI,   

Plymouth 1928 1929 1930 Q U and 30-U up to 1561283 US built and all Canadian built,   

Oldsmobile 1924 1925 1926 1927 1929 1930 1931.   

I believe this fabric universal joint disc also fits the following vehicles. Please check dimensions before ordering. If you buy without measuring yours first and find that they do not fit just return them for a full refund (have had no returns yet). If you know of other years that it fits or if there is an error please help me update this list:   
Chrysler 1924 1925 1926 1927 four cylinder models 50 & 52,   

Maxwell 1924 1925 1926 1927 four cylinder,   

Studebaker 1920-1927,   

Willys Knight,   

Reo 1922,   

Nash 1926,   

Franklin1919-22 A-B and 1920-21 Series 9,   

Hupmobile 1922,   

Durant late 1921-26 A-22 four cylinder and 1922-24 B-22 six cylinder.   

This is one new drive shaft disc, select your quantity during checkout. Most cars take four disks. If you can fit 5 or 6 in without forcing it then that is usually the number used. If five are used usually three go in back and two in front.

$40.00 U-Joint Coupler Disc
Pay with Credit Card or PayPal.     For CC proceed to checkout & press Continue near center of page.


[ First ] [ Prev ] [ Next ] [ Last ]



|Home| |Tap & Drill Rack| |Colletizer R8| |Colletizer 5C| |Colletizer DA200| |Colletizer DA180| |Colletizer ER16| |Colletizer ER20| |Colletizer ER32| |Colletizer TG75| |Colletizer TG100| |Colletizer 6K| |Carbide Inserts| |U-Joint Disc| |Collet_Dimensions| |Payment/Shipping| |Machine Shop| |About| |Contact Us| |VMCCA Car Tour|